Exactly the type of thing I was going to design for an endoscope display I have. Nice.
Sent from my Pixel 5 using Tapatalk
Type: Posts; User: MSUICEMAN
Forum: 3D PRINTED RELATED ITEMS
Exactly the type of thing I was going to design for an endoscope display I have. Nice.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
Also guilty as charged. Honestly how I stumbled upon the APP upgrades I didn't even see the manual, so that's my alibi.
Tyler does a really good job documenting things as I've learned through my...
Forum: 3D PRINTED RELATED ITEMS
I'm going to break down and print another base. I have enough stuff to make another minus motor and relay, so why the heck not I suppose. May even try out ASA. Have a decent profile worked up for it...
Forum: 3D PRINTED RELATED ITEMS
I sorta wondered the same, though I have a vibraprime that works well (and one that doesn't, probably need to tweak the tray some).
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
Print it, install it, and leave it there. Doesn't harm anything in my experience.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
There is a plug to go into the one hole when collating brass.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
I knew what ya meant. I haven't messed with silk much, though I do have some. I hear the prints aren't as strong as normal PLA but who knows. Been looking for printing motivation lately. Probably...
Forum: 3D PRINTED RELATED ITEMS
Polypropylene? Interesting. I print on PEI coated spring steel or glass. The glass carborundum bed was ok for a while but seemed to wear out as eventually I'd have a lot of adhesion issues.
I...
Forum: 3D PRINTED RELATED ITEMS
I've seen some black slides and jaws in the wild on youtube. Assuming it's a mixed bag from Lee.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
These are the aftermarket APP slides you print yourself. In whatever color filament you have.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
Yeah, I was new to ABL systems and somewhat new to 3d printing at the time I tried it. It may have been something I did. If I get another printer, I will try it. Though my next printer will likely...
Forum: 3D PRINTED RELATED ITEMS
I have an ezabl pro sitting around that I need to try again. Was getting repeatability issues, but I like the concept.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
I would think the same commands as a CRTouch would work. I can't think of why one probe wouldn't have the same startup (though you may have different preferences regarding meshes, and depending on...
Forum: 3D PRINTED RELATED ITEMS
https://github.com/MSUICEMAN/Alternate-Locator-Buttons-for-Dillon
think i made a public repository correctly.
Forum: 3D PRINTED RELATED ITEMS
my laptop with a ryzen 7 3700, and 16GB ram, with an Nvidia radeon vega mobile Gfx (believe its shared memory) runs Fusion360 surprisingly well. ymmv though.
Forum: 3D PRINTED RELATED ITEMS
you are more than likely right on the shellplates. though i've loaded probably 20+k rounds on my 550 without issue, may also be cartridge specific. should work fine for locator buttons though.
Forum: 3D PRINTED RELATED ITEMS
I made STLs out of all the data I could find (plus some measurements of my own) for Dillon locator buttons. Can't find info for #6, but that is for Short or Super Short Mags, which I don't and...
Forum: 3D PRINTED RELATED ITEMS
For times sake... I'd probably fill that with JB weld, sand flush, prime and paint. Just be done with it.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
That's exactly what I do, too. I have it up top, definitely for brass, but oftentimes for sizing bullets too.
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
I'm a tinkerer by nature. Plus I didn't know if I'd like 3d printing or not, so I ended up with two enders, one 3v2, one 3 pro. Both are heavily modded and upgraded at this point with new tubes, one...
Forum: 3D PRINTED RELATED ITEMS
Fancy shmancy! Fact is, I'm jealous of your printer. Wish I had advice about the switch, I went with the proximity switch option, and it just works when face to face with the flat of the drop tube. ...
Forum: 3D PRINTED RELATED ITEMS
Yes on Tapatalk
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
Back when bulletin forums were kinda clanky and common, I used Tapatalk because it was a one stop shop for nearly all your forums. Now the forum software is good, and I belong to less forums with...
Forum: 3D PRINTED RELATED ITEMS
I have a bookmark in my browser
Sent from my Pixel 5 using Tapatalk
Forum: 3D PRINTED RELATED ITEMS
Yeah, signatures don't show up on Tapatalk.
Sent from my Pixel 5 using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |