Is there any place out there that sells powder coated hollow point handgun bullets. Or some place that would powder coat my bullets.
Is there any place out there that sells powder coated hollow point handgun bullets. Or some place that would powder coat my bullets.
"The reason a dog has so many friends,He wags his tail instead of his tongue."
"I don't always listen to Black Sabbath,But when I do so do the neighbors."
Consider doing it yourself. It’s not that hard and doesn’t cost much to get started in, especially if you can find a small oven in a thrift shop. I don’t find PCing hollow points more difficult than normal boolits. If you do get a bit of powder in the hollow point, it won’t make a big difference.
https://sscastbullets.com/product/35...-check-hi-tek/
Straight Shooters Cast Bullet Company in West Virginia. They make a perfect bullet for duplicating the .38spl. 158grn. LSWCHP "FBI load", using pure plain lead with a Brinell hardness number of only 5 in order to ensure opening up at snubnose sub-1000 fps velocities, baked with Hi-Tek and given a gas check.
When democracy becomes tyranny, those of us with rifles still get to vote.
LongCarbine Try enamel spray paint and bake them 30 minutes at 400 degrees in a oven that will never be used for food .
The bullets must be rinsed with acetone before spraying , I have driven soft lead over 2100 f/s this way in rifles and 1700 in 10" contender.
When I think back on all the **** I learned in high school it's a wonder I can think at all ! And then my lack of education hasn't hurt me none I can read the writing on the wall.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |