Is anyone familiar with this mold? Has anyone ran it, in AR platform ?
NOE 227-79-SP-B5
https://noebulletmolds.com/site/prod.../227-79-sp-b5/
Is anyone familiar with this mold? Has anyone ran it, in AR platform ?
NOE 227-79-SP-B5
https://noebulletmolds.com/site/prod.../227-79-sp-b5/
Just because it’s a bad idea…
…. Doesn’t mean it won’t be a good time !
I have this mold but have only used it as subsonics in a 1-7 twist pistol length barrel. And these have to be ejected manually but are a blast thru a suppressor for short range steel target plinking.
How do you planning on running them?
I bought the mold for using this boolit in a 10 inch 1-7 twist 22 Hornet barrel suppressed. Twice the bullet weight of a 22 LR subsonic round means more smack and ringing on my homemade steel targets for more fun factor.
I don't have 227-79-SP but do have 225-70-RN.
It shoots very well out of my RRA Lar 15 with 24" heavy stainless 1-12 twist
I can average 1" groups at 100 and the load cycles the action
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |