Here is a cost break down of both what I deem necessary and what additional upgrades I have to offer to make 9mm bullets from various jacket materials using my BTSniper premium dies.
All my pistol and large bore caliber dies start off with the same three basic dies, a point form die, core seat die and core swage die. These three dies when paired with available commercial jackets will make perfect JHP bullets of any weight the user wishes.
BTSniper Premium swage dies
$549.00 Point form die
$549.00 Core bleed die
$499.00 Core seat die
*Core swage/bleed die may not me necessary if one is happy to use commercial boolits cast from commonly available molds. Slight fluctuations in final bullet weight may be a result from cores or various weight pieces of brass but accuracy differences will most likely not be noticed. For making 9mm bullets I like to use the 32 cal 90-95 grain cast boolits for cores.
Base Punches
Shell holder style base punches for using any decent reloading press
$89.00 ea. one base punch needed per die
Threaded base punches for BTSniper improved Lee Classic Cast press
$69.00 ea. one per die is required
Auto Eject Systems
A great addition to speed production rates and reduce fatigue is to add an auto eject to your press.
Press with 1" ram
$225.00
Lee Classic Cast press
$225.00
Auto Eject for customer that already has the Lee Classic cast press
*looking closely it is a shell holder ram top pictured, the threaded ram top that uses my 1/2-20tpi base punches is shown in pic below. Shows that both my threaded base punches and shell holder style base punches can be used if necessary, threaded is standard, shell holder style is more expensive option.
Swage Press with Auto Eject
I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up.
BTSniper improved Lee Classic Swage press with auto eject
$399.00
BTX Multi Caliber Notch Die
makes perfect XTP style bullets
$249.00
Internal pin for core seat die to make jackets from top of 223rem brass or 3/8" copper tubing.
$199.00
9mm bullets from 223rem jacket, commercial jackets, 3/8" copper tubing.
Draw die to reduce 3/8 tubing or 223 brass to 9mm,
$225.00
These are the options and available tooling required to form 9mm bullets from 223 rem brass, copper tubing or commercial jackets.
Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.
For order instructions or any questions feel free to contact me.
Brian Thurner
PO BOX 1783
Hood River, OR.
97031
BT_Sniper@hotmail.com
BTSNIPER llc.
541-436-4095[/B]
Good shooting and swage on!
Brian