Anyone loading the Lee 365 95 gn FN in a 380 automatic ? I've read it doesn't function very well ? Looking for a boolit for training/practice for TOWMBO, and just don't like the looks of the 95 (+-) RN that looks like a thimble.
Thanks
Anyone loading the Lee 365 95 gn FN in a 380 automatic ? I've read it doesn't function very well ? Looking for a boolit for training/practice for TOWMBO, and just don't like the looks of the 95 (+-) RN that looks like a thimble.
Thanks
IHMSA # 566 "time sure flies when you're having FUN"
If you mean 356 95 gn FN then yes, I load it in 380. I have had zero problems with it. It has never failed to feed in my Bersa Thunder. Accuracy if better than I can hold.
I powder coat with Smokes powder. Alloy is 50-50 COWW and soft, sized .356.
I just started casting with it so I don't have any experience....yet...however, I have the LEE 356-102 RN mold and it is very reliable in my 380. Never a stovepipe or jam.
redhawk
The only stupid question...is the unasked one.
Not all who wander....are lost.
"Common Sense" is like a flower. It doesn't grow in everyone's garden.
If more government is the answer, then it was a really stupid question. - Ronald Reagan
Been loading it in my wife's Ruger. It eats it up. All my guns love the Lee flat nose boolits. In .380, 9mm, .38 special, .357 magnum.
ACC
I load the RD group buy that was the same shape listed at 102 gr. It is very accurate, functions well and feeds fine in my Beretta 84 and 86. Now in a Taurus TCP it does all of the same, except it locks the slide open most every shot! The dia of the nose is big enough to bump the slide lock lever that’s supposed to only hit the mag follower. I was going to grind some clearance but Taurus does not sell a repair part, so I have not gone farther with it. Should be fine in LCP and the like without a last shot hold it open lever.
“You don’t practice until you get it right. You practice until you can’t get it wrong.” Jason Elam, All-Pro kicker, Denver Broncos
Im looking to load the 356 95 RF in 380 for the wifes Bersa. Im interested in load data and OAL used.
My CZ83 likes that bullet a lot. It liked 2.6gr of Titegroup at .95 the best.
It has worked exceptionally well in each of my 380's (Colt Pocketlite, Walther PPKs, Beretta 84f, Ruger LCP,) except for an old Llama, wherein the last round in the magazine inevitably jams on the feed ramp. I have tried several magazines but all seem to either need the feed lips widened to release the round a little sooner, the follower bent up a little, or some combination of the two. One of these days I shall get around to fiddling with it to see if I can cure that gun of that bad habit.
I load it with 2.7 grains of WW-231 or Bulls Eye, sized .357 at an OAL of .915.
_________________________________________________It's not that I can't spell: it is that I can't type.
The Lee 356-95-RF at an oal of .925" functions perfectly through my LCPII, Bodyguard, Baby Rock, Bersa Thunder, Pico, and 380EZ. They sometimes stop on the feed ramp of my Spectrum but I think that's just a flaw of the pistol. My favorite, most accurate loads are below. Some may not be published loads so use at your own risk, or reduce and work up.
Autocomp 3.7gn
CFE Pistol 4gn
Sport Pistol 3.1gn
Last edited by BC17A; 03-13-2020 at 09:06 PM.
I’m using Harbor Freight Yelow PC. Sized to .356” with PowerPistol in my S&W Sheild. It’s more powerful and more accurate than any factory ammo I’ve shot through it. Feeds perfectly.
Also have “economy” load with TightGroup. Worked “down” load till it just is reliable feeding/ejecting. Cases look unfired. Six cavity molds rain bullets..
Wonder where that design came from?
Ranch Dog designed it, in fact, mine is one of from a group buy he orchestrated 8 or 10 years ago. For a while, he was running a business where in he designed various molds and had them made by LEE for resale. Eventually, his other ventures took up so much time that he had to give up the custom mold business. Most of his designs are now available from NOE. I have had sterling service from the three that I own. He created one in particular that was near perfect for Marlin 336 30-30 Carbines.
_________________________________________________It's not that I can't spell: it is that I can't type.
Anyone work up a 380 load with unique?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |