I have a S&W 686 .357 and I wanted to ask if anyone can tell me the hole pattern for the cartridge holes in the cylinder?
Thanks in advance for your help.
I have a S&W 686 .357 and I wanted to ask if anyone can tell me the hole pattern for the cartridge holes in the cylinder?
Thanks in advance for your help.
The sooner I fall behind...the more time I have to catch up with
.
All I know is that speedloaders for the 686 are identical to ones for the Ruger GP-100, so the chamber pattern is the same.
.
Sixty degrees apart and measure the radius from the center pin to the center of the chamber, I don't have an L frame.
Robert
Yeah, I'm not real sure exactly what you are asking, other than being 60 Deg, are you asking for the pattern for the mill index? Or something else?
Ron Reed
Oklahoma City, OK
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |