Would like to get some good stout load's for hunting with my 44 Special using 250 gr Boolits, have some unique on hand and some 2400.
Any body have any ?
Thank You
Jason
Would like to get some good stout load's for hunting with my 44 Special using 250 gr Boolits, have some unique on hand and some 2400.
Any body have any ?
Thank You
Jason
I use the "Skeeter" load of 7.5grs of Unique...it works mighty well behind a 429421... chrono'd average of 950fps. I haven't shot a deer with it yet, that it didn't kill quickly.
I have 6,44special handguns, and this is the only load that I use for all of them.
Last edited by shoot-n-lead; 10-04-2015 at 05:17 PM.
Ought to work fine on hogs.
Only left handed guns are interesting!
I've shot a couple deer with Skeeter's load (7.5 gr under the 429421) from a 4" M28 S&W I had converted some years ago. Worked fine and will work fine on hogs. Just don't expect a DRT unless the central nervous system is hit solidly.
Larry Gibson
What kind of firearm are you using? 12-13 grs of 2400 with a 250 gr boolit should get you where you want to be. I can't quote a velocity w/o knowing the barrel length.
This country has gone to hell but now there is hope for us.
8.0 of power pistol gets Skeeter load velocity with lower pressures. Shoots good in multiple .44 specials for me.
Paper targets aren't your friends. They won't lie for you and they don't care if your feelings get hurt.
my skeeter load is a little less unique, .3grs less.
that ruger medallion will still tear the skin off my thumb after a bit if I don't Band-Aid it.
it's a good enough load to kill steers and hogs for butchering without any drama.
13.5 gr of 2400 if that's what you have. My favorite though is 9.5gr of HS6.I have a new Flattop though so wouldn't recommend these in any older/weaker guns or a CA Bulldog.
Mine is 13.2gr of 2400. Using that in a 7.5" Ruger Super Blackhawk and a Smith M69. Going to try the smaller Unique load and the Power Pistol load when I get back from traveling. Thanks for those
-Matt
Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN
just another face in the croud
7.5 gr unique and a 250 gr. Slovenia Sleigh
Hit em'hard
hit em'often
Lots of good info here -- Brian Pearce article:
http://www.goodrichfamilyassoc.org/4...%20Special.pdf
The above loads are for sturdy S&Ws, Rugers, and Colts. You aren't planning on using a Charter Arms Bulldog, are you?
Hey guys, has anyone tried trimming down 44 mag brass to fit in the 44 Special? Just wondering because I have 44 mag brass and nothing chambered for 44 mag. Got an old S&W hand ejector chambered for the special.
Oh great, another thread that makes me spend money.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |