My 6.5 mm Mannlicher has a .267-.268 bore who makes a mold of this size. After 5 shots the bullets start to keyhole very slightly. All 6.5 available seem to be .266. I will also be shooting a 6.5 Carcano.
Thanks
Nick
My 6.5 mm Mannlicher has a .267-.268 bore who makes a mold of this size. After 5 shots the bullets start to keyhole very slightly. All 6.5 available seem to be .266. I will also be shooting a 6.5 Carcano.
Thanks
Nick
I just got this one for my 6.5 Arisaka. http://noebulletmolds.com/NV/product...roducts_id=113 Using range scrap it casts at .270 and weighs 147 dry. Would like a little longer boolit as loading out till bolt will just close the boolit only goes to the first band in the neck. About half of the neck. The next size up at NOE is alittle longer and heavier, might try that one too.
I just got the same one a krallstar and it drops ar .272". Still waiting on my sizers from Buckshot. Seems my check is lost somewhere in the USPS system. I even took inside the P.O. and dropped it in the slot.
That's what i need now. I need a lee style sizer at .270 So Buckshot is who i want to talk to.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |