you might just want to look at this thread:
http://castboolits.gunloads.com/showthread.php?50114-Taurus-Tang-Sight-on-Puma-92
Type: Posts; User: budman46
Forum: Leverguns
you might just want to look at this thread:
http://castboolits.gunloads.com/showthread.php?50114-Taurus-Tang-Sight-on-Puma-92
Forum: CB Loads / Military Rifles
i prefer 18 gr of 2400 with 170-180 gr cast...1800 fps (seemingly without regard to the position of the powder in the case), but a good, light, plinking load that works well is magtech's .32 cal 98...
Forum: CB Loads / Military Rifles
the sizer die is one of lee's units that i honed out to .331" (my bore size) with emery/crocus cloth in a split brass rod and a cordless drill. chrono'd, the load gave me 1800 fps.
Forum: CB Loads / Military Rifles
elf,
castboolits are less streamlined than jacketed; deeper seating will prevent them from sticking and dumping powder. this is common with swiss k-31's even with most available j-bullets.
Forum: CB Loads / Military Rifles
lee dies work well for my m95, but their .329" mould listed for the steyr needs to cast at least .331", so i got a lee .338 cal. mould and size it to .331", gas-checked and lubed with liquid alox. it...
Forum: CB Loads / Military Rifles
in my experience it's hard to beat 2400 in cast rifle loads. 18 gr in all my milsurps except the 8x56r (20gr) give 1700-1800 fps with 2-3", iron-sighted accuracy @ 100 yds.
i size .325", which...
Forum: CB Loads / Military Rifles
my 7mm's (7tcu, 7mm-08 and 7x57s like lee's design with charges of 2400 giving 1800 fps, or so.
rcbs's 200g gc and rx-7 (28.0g) or mp5744 (23.5g) in my contender super 14 and marlin 336 works well.
i switched to 2400s after reading about its consistent performance in a wide variety of...
mas,
you haven't missed anything not having used S&W's target trigger. supposedly they spread the pull over a larger area, feeling like a lighter trigger pull. maybe so, but they don't help...
Forum: CB Loads / Military Rifles
wonderwolf,
years ago i used a 200 gr lyman design with 29.0 gr of rx-7 in an hk-91; they worked well and dropped the brass 3-4' away.
now i use with a 170 gr lee and 17 gr of 2400 in a...
Forum: CB Loads / Military Rifles
aviator troy,
lee's 7.62x39 tl design sized .311/.312 over 17 gr of 2400 is my go-to for all my .30 calibers, including the 7.7 jap. you'll like the load and the rifle.
Forum: CB Loads / Military Rifles
don,
i got an ati scope mount for an enfield no4 mk2 through amazon and am very pleased. the only mod to the rifle is removal of the ladder sight...totally reversible...i've not experienced any...
Forum: CB Loads / Military Rifles
i've used lee's die set as is for two m-44's , one 91/30 and a finn m39 for over 10 years for both cast and j-bullets (dia. .311). offhand accuracy is consistently "minute of milk jug" at 100 yds.
Forum: CB Loads / Military Rifles
wallenba,
every time i've pulled a gas-checked bullet, the check remains in the case...shoot 'em up!
Forum: Reloading Equipment
retired an rcbs lubrisizer in favor of the lee system...costs less, seats gas checks, no top punches and tons faster.
liquid alox has performed at 1800 fps for thousands of rounds in my...
Forum: Casting Equipment
lee's push-thru sizers with liquid alox (lee or xlox) are the new paradigm for me. my rcbs lubrisizer is idle.
Forum: Reloading Equipment
my dillon's are dusted off when i plan on runs of 100 or more, but like other posters, i prefer lee's classic cast turret, who's removable turret design lets me to keep die set-ups in small coffee...
Forum: CB Loads / Military Rifles
two powders seem to reign with cast bullets in rifles, red dot and 2400. my ww2 era milsurps like 17.5 gr of 2400 with 160-200 gc designs for 1800 fps and 3-4" iron-sight accuracy @100 yds.
Forum: Military Rifles
idahosharpshooter,
i sold an hk91 and regretted it for 20 years. i just found a cetme and grabbed it.
the -91 was a bullet caster's dream; with a 200 gr lyman design and 29 gr. of rx7, cases...
Forum: CB Loads / Military Rifles
as a couple have mentioned, get both...you won't be sorry. i prefer the sights on the no.4, but i don't mind the patridge style of the ishapore.
budman
ignorance is fixable...
Forum: CB Loads / Military Rifles
shooteraz,
my milsurp loads of 150-200 gr gc castings chrono 1800 fps. i use liquid alox and as long as they're properly sized, no leading after hundreds of loads.
i shoot plain base liquid...
Forum: CB Loads / Military Rifles
someone mentioned a forster case trimmer...even 4mm is a lot to trim with the hand-cranked version; i like lee's fixed-length, caliber-specific trimmer set-up with the large wooden ball on the cutter...
Forum: CB Loads / Military Rifles
d.winchester,
i like your pile of castings...the lee tlc165 sized @ .311" works very well in all my .30s: .308 win, 7.5x55, 7.5x54, 7.62x54r, 7.7x58, 7.63x53, and .303 brit. with 17g 2400 for about...
Forum: CB Loads / Military Rifles
my first 8mm mould was lee's 8x65r design for the m95 steyr. lubed with liquid alox, checked and sized to .325". propelled by 17 gr of 2400, it will shoot 3-3 1/2" groups at 100 yds in my...
Forum: CB Loads / Military Rifles
dschuttig,
you got me! my lee 8x56r casts .330", but i beagled it to throw larger...i'm ordering their .338 design which i'll size to .332".
the 8x56r lee sized to .324 for my 8x57 shoots very...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |