I selected the lower vel I use for plinking, ~1000fps. Don't use it much since primers got more expensive.
For target shooting I use the highest vel I can get and still maintain the needed...
Type: Posts; User: charlie b
Forum: Cast Boolits
I selected the lower vel I use for plinking, ~1000fps. Don't use it much since primers got more expensive.
For target shooting I use the highest vel I can get and still maintain the needed...
Forum: Cast Boolits
Loaded up another batch of .308's with 165 XCB's. Barely made a dent in my stash.
Forum: Cast Boolits
You could ask.
I bought the .302 body size die and use it to size the nose of the XCB. It works for lubed and PC'd. The taper is almost perfect. It allows me to seat the bullet out quite a bit....
Forum: Cast Boolits
Yes, quite a few good .30 jacketed bullets but the OP asked about cast.
Forum: CB Loads / Military Rifles
If I had access to a supply of 2400 I would use it in my .308.
It is position sensitive for 1800fps loads but it can be very accurate.
Forum: Cast Boolits
Forgot two things. I do not hunt, only bench shooting. The best groups I have had were with bullets jammed into the rifling. And with bore riders the bore section is a tight fit to the bore. This...
Forum: Cast Boolits
There is a thread in here somewhere of my cast bullet exploration with my .308 Savage, also a 10 twist.
Bullets I've tried:
These two were bullets purchased from Montana Bullet Works. They...
Forum: Cast Boolits
Just to clarify, the poly rifling is not the problem, it is the lack of throat. Some get them to shoot ok. I have not.
Forum: CB Loads / Military Rifles
Just an FYI. The M1 ball ammo was 174gn at ~2600fps. M2 ball was 150gn at 2740fps. If you stay at or below those levels then I would not worry.
I'm another who uses a DA revolver to 'tune' my trigger pull. I also skip a chamber every now and then to see how I am doing.
For dry fire practice you can use an old trick from the Army field...
Forum: Muzzleloading.
Perfect for concealed carry :) Nice looking little thing too!
Forum: CB Loads / Military Rifles
Following the thread since I've been playing with the idea of making a new plug for my Garand as well.
Long Covid. Hang in there. Wife got it last Jan. She is still dealing with joint issues...
Forum: Cast Boolits
Don't know. From what I have read from others the VP9 might do ok with lubed cast bullets. I PC all of my pistol bullets and I suspect the sharp edge to the rifling is scraping the coating.
...
Forum: Muzzleloading.
^^^THIS!!
Should have been handed off to one of the traditional Japanese sword makers. Make a real weapon out of it.
Forum: Cast Boolits
The problem I have with my HK VP9 is not the rifling. There is no throat. The sharp edges of the rifling 'shave' off a bit of the bullet and makes for poor accuracy. Jacketed works well. I...
Forum: Cast Boolits
Back when I got my .45LC (1980's) and was looking up loads there was an article about an African PH who used a Ruger BH for his backup "lion gun". His loads were HOT 300gn lead cylinders just like...
Forum: Military Rifles
Had an NCO who was a marine tanker in VN. He kept an M1/M2 on the turret when he needed to hit a tgt closer than his MG would pivot. He used it quite a bit and was not in the least disappointed by...
Forum: Cast Boolits
You might look up and see if you need a license to sell lead or lead alloys. Other than that all the rest of the stuff, molds, pot and sizing stuff should be ok.
Forum: Cast Boolits
Just wondering. Why are you adding tin and how much? I've never felt the need to do that.
Forum: CB Loads / Military Rifles
Keep in mind that the 10 twist barrel tends to favor loads below 2000fps.
My std Garand really liked the 210gn bullets at 1900fps. It would function with 165gn bullets at 2100fps, but, they were...
Forum: Coatings and Alternatives
If you don't want to go with Smoke's offerings then Eastwood Ford Light Blue is the most foolproof I have used.
Forum: Cast Boolits
My pot is around the same temp. Molds are preheated on a hotplate to around 350F.
Forum: Cast Boolits
I have never had an issue here in southern NM either. The bullet lube that sits in my garage does not even go out of round (2500+).
Like Larry, I do not leave my ammo in the direct sunlight on...
Forum: Cast Boolits
I'm only 70 and am casting more bullets per year than I ever did before.
So far I still enjoy it and I like the results I get. I enjoy getting decent accuracy from cast bullets at longer ranges. ...
Forum: Cast Boolits
I am a soda jerk so a can is always around (unless I am around a pot of melted lead).
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |