I use a mix of mineral spirits 25% and 75% 2 cycle oil for the mold.
My dad made me a bearing roller for my Lee pot. It's useful for when we pour fishing weights and tooooo many bullets
Type: Posts; User: LAKEMASTER
I use a mix of mineral spirits 25% and 75% 2 cycle oil for the mold.
My dad made me a bearing roller for my Lee pot. It's useful for when we pour fishing weights and tooooo many bullets
My favorite is the tumble lube Lee 6 cavity. I bought the other 6 cavity that had the biggest metplate but I still like the tumble lube one most.
I knew I'd get a back story on this mould. I had a hunch it was a group buy thing since it says nothing on it. I remember joining this site and seeing posts about the group buys of the past and got...
I have an Noe ranch dog mould, I like it. I saw this one and got confused by it but it was interesting. I heard rumor back in the day there were various ranch dog moulds for all the fat 30-30s. Was...
I see 3 crimp grooves. Pretty interesting to say the least
This was on a Lee 6 cavity. Can this be a mold from back in the day?
325352
I saw this on eBay and it was interesting. Looks like a lube grove and a tumble lube section.
Thanks for the information!!!
Forum: Hunting with CB's
It certainly does, that's where my Idea came from. The 3rd addition is my go to for plinking loads with all the fast powders
Forum: Hunting with CB's
Sounds like I should make the plinking load and use it at the range. Worry about the hunting load when it comes to it. Thanks guys. Ask if you bring up good point
Forum: Hunting with CB's
The reason for 700x is I have it and use it for all my pistol rounds.
I also have h335 type pull down powder. But I know that stuff gets squirrelly in partial loads. I had planned on keeping it...
Forum: Hunting with CB's
I can't believe I forgot that....
308 and 30-06
Forum: Hunting with CB's
I was wondering if anyone out there uses a reduced load for hunting. If so, what distances are you limiting yourself to?
I have the Lee 312-185 mold that drops 200 for me. Been kicking around the...
Forum: Reloading Equipment
Not sure, used my dad's load all when I was a teenager. Maybe 2005ish.
Now I have 2 loadmasters, classic beech lock, the ACP and the APP. The only time I ever have issues with them is when I don't...
Forum: Hunting with CB's
Thank you everyone for the replies. Settled on 00 steel per the guys who have been doing it. Might try 3/8 shot one day.
Forum: Hunting with CB's
Yes, visiting a wildlife refuge that's on the Colorado River. The couple near me all require non toxic shot
Forum: Hunting with CB's
I'm going to hunt a place that requires non toxic shot.
In Arizona
Forum: Hunting with CB's
I need help with something. I need to make some lead free buck shot loads for feral pigs. I assume they aren't monsters yet. 120 looks like the biggest documented.
Would it be better to use steel...
Forum: Casting Equipment
I haven't been melting lead weights for very long or very much. Probably under 600 lbs in my Coleman stove. But I've accidently let zinc weights into batches all along the way and they haven't melted...
Forum: Casting Equipment
9 years ago I bought a Coleman white gas stove for a few bucks. Burnt a quart of fuel through it while doing a 300 lb batch of wheel weights.
Bought a gallon of gas from terribles and used gas...
Forum: Reloading Equipment
I have a Lee Loadmaster that I bought from a person on here. I find I use it more like a turret press with rifle rounds than any other way. I feel it's a Pretty versatile option since you can get...
So the fact it's a gas gun doesn't really change where to start?? I acquired a few loads for a Remington 742, to make them cycle was a touch faster that the RPM threshold from Larry.
Thank you...
This is my first gas gun. Round count is low.
Where should i start as far as powder and cycling pressures? I have a build sheet as far as what components are there if any of that changes things.
...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |