I've tried multiple searches for information on forming 7.5x55 cases to no avail.
Is my google-fu on the fritz?
Is it the wrong phase of the moon?
Or so simple that any low grade moron could figure it out before breakfast?
Or is it un-doable?
Printable View
I've tried multiple searches for information on forming 7.5x55 cases to no avail.
Is my google-fu on the fritz?
Is it the wrong phase of the moon?
Or so simple that any low grade moron could figure it out before breakfast?
Or is it un-doable?
I am curious as to the parent cartridge you would use for the task. The base diameter of the 7.5x55 is .496"+/-, whereas the 30-06 is .471" +/-. 6.5x55 is stated as being .480" +/-, however I have as yet not found a commercially available case that meets that specification. Perhaps Lapua does, but Norma decidedly does not.
Aside from the "case head swelling to fit the chamber" issue, One may encounter issues with extraction.
Just my thoughts on the matter. As always, YMMV.
https://youtu.be/6fP91Mc38qQ?si=-lUbhfAAp3hLrQ_NQuote:
Originally Posted by 15meter
Sent from my Pixel 5 using Tapatalk
Or you could call Graf's and order it also.
Sent from my Pixel 5 using Tapatalk
Serviceable 7.5 Swiss can be easily reformed from .284 Win by simply running the .284 cases through a 7.5 Swiss full-length die. Necks will be a smidge short...like forming 30-40 Krag from .303 Brit...but not enough to really matter. The downside of this is that the last time I looked around .284 brass is was harder to find (and considerably more expensive!) than the Privi 7.5 Swiss in stock at Grafs, Powder Valley, and Natchez.
Added thought: Rim dia. of the .284 is slightly smaller (.020 or thereabouts IIRC). This has not been an issue in my 1937-vintage K-31 but I do get an occasional failure to extract using that brass in my G96/11.
Bill
I used 284 Win, as stated above it works well. Grafs was available and I had some but did it just because. Should have kept the 284 as it is now hard to find. I sold my last bag to my vet, glad to have it. It is available now at Grafs, can't make it any cheaper and Grafs is good brass.
Midway has PPU 7.5x55 brass in stock.
It's easier and cheaper to find 7.5x55 brass than 284 in stock these days. Midway or Graff and Sons.
284 is it. But with 7.5 Prvi available it isn’t worth it.
Have done the .284 conversion and it's pretty good. Rim is close, but functions OK.
Thanks for the pointers on where to buy the brass, I don't really need the brass, this was more a "can it be done" question.
I was stopping at a gun shop this afternoon that had a nice 7.5x55 rifle on shelf when I was in there Saturday that had caught my eye.
Didn't buy the rifle but did buy a like new Savage in 6.5 Creedmoor.
I know, virtually the same rifle.
And 139 pieces of new 7.5x55 Norma brass. And dies for the Creedmoor. I think I confused the guy behind the counter.
Certainly confused me, I don't own a 7.5x55.
But a buddy does, so it's all good.
Back to the original question, 284 Winchester seems to be the donor case of choice.
Don't remember the diameter of various and sundry belted magnums, is it possible to turn these down and still have enough meat left to make a serviceable case? I've done this in the past to make 350 Rigby Magnums.
This is more a can it be done question, than something I'm going to do in the next hour.
I've got 6.5 Creedmoor's to form from 22-250/.243 Winchester or whatever else comes out from under the bench.
6.5 - 284 brass is actually fairly obtainable. Would be roughly the same process.Quote:
Originally Posted by 15meter
Sent from my Pixel 5 using Tapatalk